EyePoint - systems for localizing faulty electronic components on PCB, as well as for identifying counterfeit, remarked or damaged components in BGA packages based on the analog signature analysis (ASA) method. The EyePoint products line includes automatic (P10, B10, P10b, MUX) systems, manual (S2, u21, u22, H10) systems and OEM module a2 with open API, which can be built into existing user systems.

EyePoint P10
Automatic localization system for faulty electronic components on printed circuit boards.

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Supported enclosure types: LQFP, SOIC, SMD, SMT, DIP, etc.
  • Power Supply: ~220 V, 300 W

  • Working area: 280 x 275 x 63 mm
  • Speed of building a test map: up to 10 cm²/min
  • Testing speed: up to 100 points/min
  • Accuracy of setting the probe: 30 µm
  • Time to change the board: 30 sec
  • Minimum distance between test points: 0.4 mm
  • Maximum number of test points: 2500 pcs
  • Pin location: arbitrary
  • Control PC with software package
  • Dimensions: 604 x 543 x 473 mm
  • Weight: 50 kg

EyePoint B10
Automatic system for detecting counterfeit, relabeled or defective electronic components in BGA enclosures.

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Supported enclosure types: BGA, LGA, PGA, LCC, CSP
  • Power Supply: ~220 V, 300 W

  • Working area: 280 x 275 x 63 mm
  • Speed of building a test map: up to 10 cm²/min
  • Testing speed: up to 100 points/min
  • Accuracy of setting the probe: 30 µm
  • Time to change the sample: 10 sec
  • Minimum distance between test points: 0.4 mm
  • Maximum number of test points: 2500 pcs
  • Pin location: arbitrary
  • Control PC with software package
  • Dimensions: 604 x 543 x 473 mm
  • Weight: 50 kg

EyePoint P10b
EyePoint P10b is an automatic localization system for faulty electronic components on printed circuit boards with the ability to detect counterfeit, re-labeled or damaged components in BGA enclosures.

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Supported enclosure types: LQFP, SOIC, SMD, SOT, DIP, BGA, LGA, PGA, LCC, CSP, etc.
  • Power Supply: ~220 V, 300 W

  • Working area: 280 x 275 x 63 mm
  • Speed of building a test map: up to 10 cm²/min
  • Testing speed: up to 100 points/min
  • Accuracy of setting the probe: 30 µm
  • Time to change the sample: 30 sec
  • Minimum distance between test points: 0.4 mm
  • Maximum number of test points: 2500 pcs
  • Pin location: arbitrary
  • Control PC with software package
  • Dimensions: 604 x 543 x 473 mm
  • Weight: 50 kg

EyePoint S2
EyePoint S2 is an autonomous (doesn’t require a computer) desktop localizer of faulty electronic components on printed circuit boards by analog signature analysis (ASA) with a frequency of the testing signal up to 100 kHz.

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Power supply: ~ 220 V, 10 W
  • 7-inch color display with touch screen function
  • External pedal for additional functionality
  • The ability to connect to a PC via USB 2.0
  • Compatibility with EPLab software
  • Dimensions: 205 x 204 x 120 mm
  • Weight: 2.2 kg
The main functions of the built-in software:
  • Adjustable signature matched threshold
  • Support for the "Test Plan" mode
  • Export data in .png and .json to an external USB flash drive
The main functions of the EPLab software:
  • Adjustable signature matched threshold
  • Support for the "Test Plan" mode
  • Поддержка ОС: Windows 7 SP1 и новее, Linux (протестировано на Ubuntu 18.04, 20.04; AstraLinux - 4.15.3)
  • The ability to program control: C/C++, C#, Python

EyePoint u21
Single-channel localizer of faulty electronic components on printed circuit boards by analog signature analysis (ASA) with a frequency of the testing signal up to 100 kHz.

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Supply voltage: 5 V (via USB)
  • The ability to connect to a PC via USB 2.0
  • Compatibility with EPLab software
  • Dimensions: 100 x 65 x 27 mm
  • Weight: 0.4 kg
The main functions of the EPLab software:
  • Adjustable signature matched threshold
  • Support for the "Test Plan" mode
  • Поддержка ОС: Windows 7 SP1 и новее, Linux (протестировано на Ubuntu 18.04, 20.04; AstraLinux - 4.15.3)
  • The ability to program control: C/C++, C#, Python

EyePoint u22
A two-channel localizer of faulty electronic components on printed circuit boards by analog signature analysis (ASA) with a frequency of the testing signal up to 100 kHz.

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Supply voltage: 5 V (via USB)
  • The ability to connect to a PC via USB 2.0
  • Compatibility with EPLab software
  • Dimensions and weight: 175 x 90 x 40 mm
  • Weight: 0.4 kg
The main functions of the EPLab software:
  • Adjustable signature matched threshold
  • Support for the "Test Plan" mode
  • Поддержка ОС: Windows 7 SP1 и новее, Linux (протестировано на Ubuntu 18.04, 20.04; AstraLinux - 4.15.3)
  • The ability to program control: C/C++, C#, Python

EyePoint a2
EyePoint a2 is a single-channel OEM module without case designed to search for faulty electronic components on printed circuit boards by analog signature analysis (ASA).

  • Test signal voltages: 1.2, 3.3, 5, 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • Current range: 25 μА - 25 mA
  • R sensitivity: 1 Ohm - 10 mOhm
  • C Sensitivity: 50 pF - 6800 μF
  • L Sensitivity: 1 μH - 0.01 H
  • Supply voltage: 5 V (via USB)
  • The ability to connect to a PC via USB 2.0
  • Compatibility with EPLab software
  • Dimensions: 60 x 40 x 5 mm
  • Weight: 0.012 kg
The main functions of the EPLab software:
  • Adjustable signature matched threshold
  • Support for the "Test Plan" mode
  • Поддержка ОС: Windows 7 SP1 и новее, Linux (протестировано на Ubuntu 18.04, 20.04; AstraLinux - 4.15.3)
  • The ability to program control: C/C++, C#, Python

EyePoint H10
EyePoint H10 is а high-frequency single-channel localizer of faulty electronic components on printed circuit boards using analog signature analysis (ASA) with a test signal frequency of up to 12 MHz and a wide range of voltage and current sensitivity selection.

  • Test signal voltage: 1, 1.5, 2, 2.5, 3, 4, 4.5, 5, 6, 6.7, 7.5, 10 V
  • Frequency range of the test signal: 1, 5, 10, 50, 100, 400 Hz, 1.5, 6, 25, 100, 400 kHz, 1.5, 3, 6, 12 MHz
  • Current range: 0.5 μА - 90 mA
  • R Sensitivity: 1 Ohm - 100 kOhm
  • C Sensitivity: 0.5 pF - 6800 μF
  • L sensitivity: 0.1 - 80 μH
  • Power supply: ~ 220 V, 10 W
  • The ability to connect to a PC via USB 2.0
  • Compatibility with EPLab software
  • Dimensions: 137 x 65 x 110 mm
  • Weight: 0.4 kg
The main functions of the EPLab software:
  • Adjustable signature matched threshold
  • Support for the "Test Plan" mode
  • Поддержка ОС: Windows 7 SP1 и новее, Linux (протестировано на Ubuntu 18.04, 20.04; AstraLinux - 4.15.3)
  • The ability to program control: C/C++, Python

EyePoint MUX_M
EyePoint MUX_M is the main unit of the multiplexer required to work with Eyepoint MUX_S_A modules. Allows you to connect up to 8 modules with 64 channels each (up to 512 channels in total). It is used in conjunction with manual signature analyzers of the EyePoint line.

  • Supply voltage: 5 V (via USB)
  • The ability to connect to a PC via USB Type-C
  • The ability to program control: C/C++, C#, Python
  • Dimensions: 130 x 75 x 17.5 mm
  • Weight: 0.115 kg

EyePoint MUX_S_A
EyePoint MUX_S_A а 64-channel multiplexer module. Allows you to probe each of the 64 channels in relation to a common wire (one to many). Used in conjunction with the main EyePoint_MUX_M unit.

  • Test signal voltage range: 0.1 - 12 V
  • Frequency of the test signal: 1, 10, 100 Hz, 1, 10, 100 kHz
  • The current range of the transmitted signal: 1 µA - 90 mA
  • Channel impedance: 11 Ohm
  • Channel capacity: 100 pF
  • Dimensions: 130 x 75 x 17.5 mm
  • Weight: 0.115 kg

sales@chipdip.ru

+7(465)544-00-08

ostecelectro@ostec-group.ru

+7(495)788-44-44 (доб. 5000)